Gateway problems
Look up the message or light pattern you see and follow the recommended action.
Messages in the app
Section titled “Messages in the app”| Message | Action |
|---|---|
| The network blocks port 443. | Ask IT to allow outbound traffic to api.argossense.com on port 443. |
| The network gave the gateway no address. | Ask IT to enable DHCP for the gateway. |
| The gateway cannot find the network. | Move the access point closer or select another network. The network must be 2.4 GHz. |
| Wrong key. Check the label. | Re-enter the key, or scan the QR code instead. |
| This gateway belongs to another company. | The gateway is registered to a different company. Contact support. |
| This gateway is registered to another site of the company. | Ask your administrator to reassign it. |
| Your account cannot install gateways. | Ask your administrator for a role with this permission. See Team and roles. |
| The gateway did not answer. | Press the gateway button briefly and try again. |
| Turn on Bluetooth on the phone. | Turn on Bluetooth and allow the Argos app to use it in the phone settings. |
Lights
Section titled “Lights”| Light | Action |
|---|---|
| No lights | Check the power supply and the outlet. The supply must provide 5 V and at least 1 A. |
| Red: two short blinks | The network is working but blocks the Argos server. Ask IT to allow port 443. |
| Red: three short blinks | The gateway is not registered. Register it. |
| Red off | No network connection. Connect a cable or set up Wi-Fi. |
| Yellow off for a long time | No sensor in range. Check the sensors, and move the gateway closer, higher or out of any metal enclosure. |
The gateway shows Offline in the web app
Section titled “The gateway shows Offline in the web app”- Check the status lights on the gateway.
- Check the network cable or the Wi-Fi network.
- Disconnect the power for 10 seconds, then reconnect it.
- If the gateway is still offline after 5 minutes, contact support.
Restart from the web app
Section titled “Restart from the web app”Open Gateways, select the gateway and click Reiniciar (Restart). The gateway receives the command within one minute.